Ricoh BIZWORKS 106 - Manual (Page 146)

1
1. SETTING UP
1. SETTING UP
Package Contents
Make sure that all of the items shown in the Package Contents sheet that
comes with the machine are included.
WARNING
Make sure the wall outlet is near the machine and freely accessible so that in event of an
emergency it can be unplugged easily.
Do not put any metal objects or containers holding water (e.g. vases, flowerpots, glasses)
on the machine. If the contents fall inside the machine, a fire or electric shock could occur.
CAUTION
Keep the machine away from humidity and dust. A fire or an electric shock might occur.
Do not place the machine on an unstable or tilted surface. If it topples over, it could cause injury.
If you use the machine in a confined space, make sure there is a continuous air turnover.
Location
Conditions
Optimum Recommended
Temperature 10 to 35°C (50 to 95°F) 15 to 25°C (59 to 77°F)
Humidity 15 to 80% 30 to 70%
• The machine must be level within 3mm (0.11") both front to rear and left to right.
Locations to Avoid
• Avoid exposed to direct sunlight or strong light (more than 2,000 lux.).
• Avoid directly exposed to cool air from air conditioner’s or heated air from heater’s.
Sudden temperature changes can cause condensation to form inside the machine.
• Avoid where the machine mi,ght be subjected to frequent strong vibration.
• Places higher than 2,500m (8,221ft.) above sea level.
Machine Location
Place the machine near the wall outlet, providing minimum
clearance as shown.
Machine
Min. 180mm (7.09")
Min. 30mm
(1.18")
Min. 50mm
(1.97")
(Back)
(Front)