Ricoh BIZWORKS 106 - Manual (Page 168)

23
3. PRINTING
3. PRINTING
Setting Up For Printing
In order to use the machine as a printer, you must install its printer driver
on your computer. The printer driver can be found on the diskette that
comes with the machine. Use the following procedure to install the printer
driver.
Note
• The following procedure assumes that you are already familiar with basic
computer operations. If you aren’t, consult the documentation that comes with
your computer and its operating system.
• Refer to online help and Read me file of the printer driver.
• Perform the procedures under “Connecting to a computer (p. 7)” and “Load-
ing Paper (p. 10)” before trying to perform the following procedures.
To install the printer driver under Windows ® 95
1 If the “New Hardware Found” window is open, click [Cancel] to close it.
2 Quit all applications.
3 The next step you should perform depends on whether you are installing
from diskette.
< To install from diskette, follow these steps >
• Insert the diskette into your computer’s floppy disk drive (usually named A: or
B:).
• Click [Start] and then [Run].
• Type A: INSTALL (replace “A” with the name of your disk drive if it is different)
and then click [OK].
• Follow the instructions that appear on your computer screen. Note that installa-
tion takes a few minutes. After it is complete, remove the diskette from your
computer’s drive.