Ricoh BIZWORKS 106 - Manual (Page 227)

3
SETTING UP
1. SETTING UP
5 Make sure the plastic pins (marked with
“
* ” in the illustration next to step 3 )
on either side of the starter toner cas-
sette slide along the guides inside the
machine.
Note
Be sure to hold the starter toner cassette by its
handle.
6 To close the top unit, press down firmly
but gently on both sides of it until the
top unit closes and clicks securely into
place.
Note
Background gray cast is sometimes evident
just after installing a new toner cassette.
1
Unlock the scanner lock which is located
at the back of the machine.
Unlocking the Scanner Lock
Important
Be sure to unlock the scanner lock before using the machine.
The machine will not operate correctly if the scanner lock is not unlocked.