Ricoh BIZWORKS 106 - Manual (Page 165)

20
GETTING ACQUAINTED
Lower Tray? O K
Registered
4
After pressing , press
or until the desired size ap-
pears.
Letter (8 1 / 2
× 11) ? ↔ A4 ?
5 When the correct size is on the display,
press
. “Registered” appears.
1 Press until the desired pa-
per source appears.
The upper paper tray is selected when
"U" is on the display, and the paper feed
unit is selected when "L" is on the dis-
play.
To select the paper source
100% U 01
100% L 01
Note
Refer to page 10 for details on using the upper paper tray.
Note
The actual message that appears on the machine's display depends on the paper
source you last used. If "Upper Tray?" appears, press
or
to display the "Lower Tray?" message before proceeding with step 4 .
Letter(8 1 / 2
× 11)?
3
Press .
To install the paper size indicator
1 Break off the paper size indicator (1).
Positioning the indicator so the side that
shows the paper size you are using (A4
or Letter) is facing outwards, insert it
into the front of the paper tray (2).
1
2