RCA CC4251 - Manual (Page 35)

33
Playback
• Grasp the viewfinder and rotate it
horizontally. Pull the viewfinder
out from the camcorder and rotate
the eyepiece into a comfortable
viewing position
Caution: Pulling on the
eyepiece might cause damage
to the eyepiece or camcorder.
• Turn the eyepiece focus control to
adjust the focus of the viewfinder
for your vision.
• Rotate the BRIGHT control to
adjust the brightness.
5. Press PLAY to begin playback.
• If necessary, adjust tracking.
• During playback, use the playback
features on the following page.
6. Press STOP/EJECT when you are
finished.
STOP/EJECT
Button
To Play Back a Tape
1. Attach a power supply.
Attach the adapter/charger, charged
battery, or optional car cord.
2. Insert a tape.
• Press STOP/EJECT to open the
cassette compartment.
• Insert the cassette with the safety
tab facing up and the tape windows
facing out. Press the cassette down
gently until it locks into place, and
close the cassette compartment
door.
• The camcorder only plays back
tapes recorded in the SP speed.
3. Press and hold the small button on
the CAMERA/OFF/VCR switch
while you slide it to VCR.
4. Adjust the viewfinder.
Viewfinder
Eyepiece Focus
Control
PLAY
Button
Viewfinder Playback
Viewfinder playback is the simplest way to watch tapes using the camcorder.
BRIGHT
Control
CAMERA/
OFF/VCR
Switch
Eyepiece