RCA CC4251 - Manual (Page 34)

32
Recording
Titler (continued)
Record a Title on a Tape in the Camcorder
1. Attach a power source to the
camcorder. Press and hold the small
button on the CAMERA/OFF/VCR
switch while you slide it to CAMERA.
2. Locate the place on the tape where
you want to record the title.
Note: If you record a title on a
prerecorded tape, the audio and video is
erased where the title is inserted. There
will also be a three-to-four second pause
of blank tape before the existing audio
and video return.
3. Press TITLER to display the titler
graphics in the viewfinder.
4. Press REC/PAUSE to start recording
the title.
5. After you have recorded the title for
the desired length of time, press
TITLER to remove the titler graphics
from the viewfinder. The camcorder
now records normally. If you do not
want to continue recording, press
REC/PAUSE.
Remember: Remove the titler
graphics from the viewfinder for
normal recording.
Note: You can use the AUTO title feature
to automatically record the title and date
for ten seconds when you begin recording.
Press the DATE/TIME button to display
TITLE before starting to record.
1. Attach a power source to the
camcorder.
2. Place the tape you want to copy in the
camcorder and place the CAMERA/
OFF/VCR switch in VCR.
3. Place a blank tape in the VCR, and
place the VCR in record-pause.
4. Start copying the tape from the
camcorder to the VCR. Details are
on pages 36-37.
5. When you see the place on the
tape you want to insert the title,
press TITLER.
Record a Title While Copying a Tape from the Camcorder to Another VCR
6. After you have recorded the title for
the desired time, press TITLER to
stop recording the title.
7. Stop the camcorder and VCR when
you finish copying the tape.
Important Note: Remove the titler graphics
from the viewfinder for normal recording.