RCA CC4251 - Manual (Page 25)

23
Recording
Tape Counter (0000M) with Memory
Stop
Press the DISPLAY button to display the
tape counter. The tape counter helps
locate segments of tape.
• Whenever the tape counter is
displayed, the memory-stop feature
turns on.
• Details are on page 28.
Tape Warnings (TAPE, NO TAPE, and
TAPE END)
• TAPE flashes when you try to record
with the safety tab removed.
• TAPE flashes when a damaged tape is
inserted. Remove the tape and replace
it with a new one.
• NO TAPE flashes when you try to
record with no cassette inserted.
• TAPE END flashes when there is
approximately five minutes recording
time left on the tape.
• TAPE END briefly appears when you
reach the end of the cassette during
recording.
Time and Date Display
Press the DATE/TIME button to display
the time and date, AUTO date, auto
TITLE, date only, or no date when the
camcorder is in record-pause.
• These displays are recorded on the
tape when they appear in the
viewfinder.
• Details are on pages 18-19.
Tape-Remaining Indicator ( )
Press the DISPLAY button to display the
tape-remaining indicator. This display
shows the approximate amount of tape
left for recording or playback. Details
are on page 26.
Zoom ( ) and ZOOM Indicators
• The zoom indicator ( ) appears
when you use the power zoom
buttons (T and W).
• ZOOM appears when you zoom more
than 16 times.
• Details are on pages 27.
Viewfinder Displays (continued)