RCA CC4251 - Manual (Page 21)

Date and Time Display
19
Viewfinder Displays
AUTO Date Display
AUTO Title Display
Date and Time Display
11/18/1998
11/18/1998
No Display
To Select the Display to Record
1. Repeatedly press DATE/TIME to
select the display you want to record.
• Date and Time Display: The
date and time are displayed
and recorded.
• AUTO Date: The date is
automatically recorded for
approximately ten seconds at the
beginning of the recording.
Record the Time and Date, AUTO Date, Auto TITLE, or Date
The time and date, AUTO date, auto TITLE, date only, or no date can be recorded on
your tape. Whenever one of these displays appear, it is recorded.
10:25AM
11/18/1998
AUTO
11/18/1998
TITLE
Date Display
• TITLE: The date and title you
have created are displayed and
recorded.
• Date Display: The date is
displayed and recorded.
• No Display: No display is
displayed or recorded.
Charge the Built-in Clock Battery
The camcorder has a built-in rechargeable battery that must be charged
approximately every two months.
1. Attach a power supply and set the
CAMERA/OFF/VCR switch to OFF.
2. Leave the power supply attached at
least 24 hours.
Cautions: If this battery is not charged every two
months, it will over-discharge and shorten its
useful life.
Do not attempt to replace this battery. Take the
camcorder to an authorized RCA Service Center.
Repeatedly Press DATE/TIME