Regency P42-NG4 - Manual (Page 30)

Regency ® P42-4 Zero Clearance Direct Vent Gas Fireplace 30
INSTALLATION
Inner
Cut-Outs
Bottom
Flange
NOTE: Should the fi nished wall protrude beyond the face of the unit,
you can accommodate up to 1/2" depth.
Simply push in the Full Screen Door Frame until it aligns against
the fi nished wall. Secure Top Flange of Full Screen Door Frame as
described in step 3b.
For the Bottom Flange of the Full Screen Door Frame, push the bottom
of the Frame until it aligns with the wall. Use the inner cut-outs to
secure the base of the Frame using the 2x #8 Hex Head Drill Point
Screws provided.
5) Place the Bottom Grill near hinge. Flip the hinge over the Bottom Grill
and secure with 2x #8 Self Tapping Philips Screws per side.
Bottom Grill
Hinge Location
4) Install the Hinges to the Hinge Brackets on the left and right side
of the bottom of the outer frame, secure using 2x #8 Self Tapping
Philips Screws per hinge.
Backside of Full Screen
Door Frame Shown
6) Loosen the 2x #8 Self Tapping Phillips screws which secure the
Right Side Hinge Bracket to the Bottom Grill. Place the keyholes in
the Restrain Bracket through the screws and slide the Bracket to the
right. Tighten the screws to secure bracket in place.
Right Side
of Bottom
Grill
Restrain
Bracket
Hinge
Bracket
7) Re-install Glass Door. Refer to the manual for instructions.