Roland RG-3 - Manual (Page 91)

89
Chapter 6. Changing Various Settings
Preventing Changes to the
Current Settings (Panel Lock)
When “Panel Lock“ is activated, all buttons will no longer
function.
Thus, even if you press a button by mistake, the settings
remain unchanged.
Making the Setting
1. Set the desired tones and other settings.
2. Hold down the [Function] (Exit) button and press
the [Enter] button.
This activates Panel Lock.
* Pressing buttons during playback or recording of a song stops
the playback or recording.
You can perform by playing the keys.
You can adjust the volume with the [Volume] knob and
adjust the tone of the sounds with the [Brilliance] knob.
The following screen appears when Panel Lock is in
force.
fig.06-001d
Cancelling the Setting
1. To cancel Panel Lock, hold down the [Function]
(Exit) button again and press the [Enter] button.
Making Detailed Settings
You can set the master tuning, temperament, and other
settings that make the RG-3 easier to play.
The screen in which the settings are changed is called the
“Function screen.”
How to Enter Function Mode
1. Press the [Function] (Exit) button, getting its
indicator to light.
The following screen appears.
fig.06-010d
2. Press the [Song] (Select -) button or [ ] (Select
+) button to select the settings screen.
fig.06-020d
3. Press the [Song] (Select -) button or [ ] (Select
+) button so the value of the parameter you want
to change is flashing.
fig.06-030d
4. Press the [ ] (Value -) button or [ ] (Value
+) button to change the value.
fig.06-031d
Press the [ ] (Value -) and [ ] (Value +) buttons
simultaneously to restore the factory-set values.
5. If you want to continue making changes to other
settings, press the [Song] (Select -) button or
[
] (Select +) button to switch the settings
screen.
How to Exit Function Mode
1. Press the [Function] (Exit) button so the indicator
goes out.