Roland RG-3 - Manual (Page 59)

57
Chapter 3. Performance
■ Playing Sounds When the Keys Are Released
(Key Off Resonance)
You can play the “key off” sound (the subtle sound produced when the keys
are released) obtained when playing an acoustic piano.
1.
Press the [Function] (Exit) button, getting its indicator to light.
2.
Press the [Song] (Select -) button or [ ] (Select +) button to
display the RESONANCE screen.
fig.03-100d
3.
Press the [Song] (Select -) button or [ ] (Select +) button to get
the value for “KeyOff” to flash.
fig.03-110d
4.
Press the [ ] (Value -) or [ ] (Value +) button to change the
value.
5.
Press the [Function] (Exit) button so the indicator goes out.
Value Description
0–9
The volume of the Key Off sound decreases as the value is low-
ered, while raising the value increases the volume of the Key
Off sound.
The Key Off Resonance function is not active when the value is
set to “0.”
You can save this setting in
the RG-3’s memory using the
Memory Backup function
(p. 73).
NOTE
This setting is enabled only
with the piano tones
(Superior Grand, Natural
Grand) and harpsichord
tones (Harpsichord, Coupled
Harpsichord).
You cannot set this for other
tones.