Roland RG-3 - Manual (Page 79)

77
Chapter 4. Recording the Performance
Saving Recorded Performances
You can save recorded performances to the RG-3’s “Favorites” and to USB
memory and floppy disks.
If not first saved to the “Favorites,” USB memory, or floppy disks, recorded
performances are erased when the RG-3’s power is turned off.
If you want to retain such performances, be sure to save them to the
“Favorites” or to a USB memory or floppy disk.
1.
Press the [Function] (Exit) button, getting its indicator to light.
2.
Press the [Song] (Select -) button or [ ] (Select +) button to
display the FILE screen.
fig.01-230d
3.
Press the [Song] (Select -) button or [ ] (Select +) button so
“SAVE” is flashing.
fig.04-070d
4.
Press the [Enter] button.
5.
Press the [Song] (Select -) button or [ ] (Select +) button to get
the value for “Dest” (Save Destination) to flash.
fig.04-080d
6.
Press the [ ] (Value -) button or [ ] (Value +) button to
change the “Dest” (Save Destination) setting.
Display Description
Favorites The performance data is saved to the “Favorites.”
Floppy Disk The performance data is saved to the Floppy disk.
Ext Memory The performance data is saved to the USB memory.
You can copy performances
saved in the “Favorites” to
USB memory and floppy
disks.
You can also copy
performances saved on USB
memory and floppy disks to
the “Favorites” (p. 40).
NOTE
Use USB memory available
from Roland.
Proper operation cannot be
guaranteed if other external
memory products are used.