Roland RG-3 - Manual (Page 77)

75
Chapter 4. Recording the Performance
■ Notes Regarding Recording
You can store your recorded performances to the “Favorites” (p. 25). If not
first saved to the “Favorites,” recorded performances are erased when the
RG-3’s power is turned off.
If you want to retain such performances, be sure to save them to the
“Favorites.”
In addition, you can record performances to external audio devices (p. 98)
and save performance data to USB memory and floppy disks (p. 77).
Recording Performances
1.
Select the tone you want to perform with (p. 53).
2.
Press the [Function] (Exit) button, getting its indicator to light.
3.
Press the [Song] (Select -) button or [ ] (Select +) button to
display the RECORD screen.
fig.04-010d
4.
Press the [Enter] button.
The following screen appears, and the RG-3 goes into recording standby.
fig.04-020d
Start Recording
5.
Play the keyboard to begin recording.
Recording starts, and the following screen appears.
The text “Recording...” flashes while recording is in progress.
fig.04-030d
NOTE
Use USB memory available
from Roland.
Proper operation cannot be
guaranteed if other external
memory products are used.