Roland RG-3 - Manual (Page 76)

74
Chapter 3. Performance
Restoring the Factory Settings (Factory Reset)
You can return the content stored with “Memory Backup” (refer to the
previous page) to their original factory settings.
This operation is referred to as “Factory Reset.”
1.
Press the [Function] (Exit) button so the indicator is lit.
2.
Press the [Song] (Select -) button or [ ] (Select +) button to
display the FACTORY RESET screen.
fig.03-420d
3.
Press the [Enter] button.
A confirmation message appears in the screen.
fig.03-430d
Pressing the [Function] (Exit) button at this point returns you to the original
screen without Factory Reset being executed.
4.
Press the [Enter] button once more.
Factory reset is executed.
When the factory reset is complete and the screen shown below appears,
switch the power off, then back on.
fig.03-431d
NOTE
When you perform a
Factory Reset, all settings
that have been stored in
memory up to then are
erased and reset to their
factory defaults.
When you want to restore
the content registered to
the RG-3’s User memory to
the factory condition, refer
to “Initializing the User
Memory, USB Memory,
and Floppy Disks” (p. 93).
NOTE
Never turn off the power
while “Executing...” is
displayed in the screen.
Doing so may corrupt the
RG-3’s memory and render it
unusable.