Loading saved user program sets – Roland RG-3 User Manual
Page 86
84
Chapter 5. User Program Registration
Loading Saved User Program Sets
You can load sets of User Programs saved in User Memory (p. 25) or to USB
memory individually to the RG-3.
* When loading User Programs from USB memory, connect the USB memory to the
1.
Press the [Function] (Exit) button, getting its indicator to light.
2.
Press the [Song] (Select -) button or [
] (Select +) button to
display the USER PROGRAM screen.
fig.05-020d
3.
Press the [Song] (Select -) button or [
] (Select +) button so
“LOAD” is flashing.
fig.05-180d
4.
Press the [Enter] button.
The following screen appears.
fig.05-190d
5.
Press the [Song] (Select -) button or [
] (Select +) button so that
the “User Program Set to be loaded” is flashing.
fig.05-200d
6.
Press the [
] (Value -) button or [
] (Value +) button to
select the “User Program set to be loaded.”
Display
Description
User Memory
Loads User Programs saved in the User Memory.
Ext Memory
Loads User Programs saved in USB memory.
NOTE
Note that when User
Program sets are loaded, all
of the performance settings
stored in the RG-3 are
deleted.