Nortel Networks Nortel 4070 - Manual (Page 77)

Calls list
77
Transferring a number to the caller filter list
To transfer a number from the Dialled calls list to the caller filter list,
perform the following steps:
5. Press the Up or Down key to highlight the
Contacts option and press the Select soft key.
6. Press the Add soft key and use the Dialpad to edit
the number and enter the name (if necessary).
7. Press the Save soft key, and then press the Yes
soft key to confirm the changes.
8. Press the Clr key one or more times to return to the
idle display.
Attention: The Caller filter feature is available only on the DECT 4070
Handset.
1. Open the Dialled calls list as shown in “Accessing
the Dialled calls list” (page 75) .
2. Press the Up or Down key to highlight the required
entry.
3. Press the More soft key.
4. Press the Up or Down key to highlight the Save
option and press the Select soft key.
Contacts
Select
Add
Save
Yes
More
Save
Select