Nortel Networks Nortel 4070 - Manual (Page 195)

Handset accessories
195
To install or remove the Bluetooth module, you must remove the battery
pack. For more information about removing the battery pack, see
“Installing the battery pack” (page 17) .
Installing the Bluetooth module on your DECT 4070 Handset
To install the Bluetooth module on your DECT 4070 Handset, perform the
following steps:
1. Place the handset facedown on a flat surface.
2. Remove the battery compartment cover and the battery.
3. Slide the Bluetooth module into the Bluetooth compartment as shown
in
Figure 25.
4. Replace the cover after you reinstall the battery pack as shown in
Figure 2 .