Nortel Networks Nortel 4070 - Manual (Page 196)

Handset accessories
196
Figure 25: Bluetooth module installed
Removing the Bluetooth module from your DECT 4070 Handset
To remove the Bluetooth module from your DECT 4070 Handset, perform
the following steps:
1. Place the handset facedown on a flat surface.
2. Remove the battery compartment cover and the battery.
3. Pull the Bluetooth module from the compartment as shown in
Figure 26.
4. Replace the battery cover after you reinstall the battery pack as
shown in
Figure 2.
Handset
Bluetooth
module