Assigning the time and date – Nortel Networks Nortel 4070 User Manual
Page 139
Telephone settings
139
Assigning the time and date
Use the time and date option to assign the current time and date.
To assign the current time, perform the following steps:
3.
Press the
Up
or
Down
key to highlight the
Edit
profile
option and press the
Select
soft key.
4.
Press the
Up
or
Down
key to highlight the required
option and press the
Select
soft key.
5.
Make the required changes and press the
Select
or
OK
soft key.
6.
Press the
Clr
key one or more times to return to the
idle display.
WARNING
You must charge your handset before you set the
handset time and date. Every time you remove the
battery pack or switch the handset off it loses the time
and date information; you must manually reset it after
you reinstall the battery pack or switch the handset off
and on.
If your system can provide the date and time information
to DECT handsets, the date and time settings update
automatically when you switch on the handset. Contact
your system administrator to determine if you can use
this feature.
1.
Open the
General
settings menu as shown in
“Accessing the General settings menu” (page 136)
Edit profile
Select
Select
Select
OK