Nortel Networks Nortel 4070 User Manual
Page 45
DECT system configuration
45
2.
Press the
Up
or
Down
key to highlight the
Register
option.
3.
Press the
Select
soft key to start the registration
process.
4.
Press the
Up
or
Down
key to choose
Empty
if
there are less than four subscriptions to the system
on the handset, or choose the name of the system
you would like to overwrite.
5.
Press the
Select
soft key, and then press the
Yes
soft key if you want to overwrite a system.
6.
Use the
Dialpad
to enter the PARK code at the
PARK
prompt, and then press the
Save
soft key.
Attention: Use a PARK code system ID if more
than one DECT system overlaps in your location. If
only one DECT system is available, make no entry,
and press the
Skip
soft key.
7.
Use the
Dialpad
to enter the PIN (authorisation
code) at the
PIN
prompt, and then press the
OK
soft key.
8.
Use the
Dialpad
to enter the system name at the
Network name
prompt, and then press the
Save
soft key.
9.
Use the
Dialpad
to enter the phone number
assigned to your handset at the
Number
prompt,
and then press the
Save
soft key.
Register
Select
Empty
Select
Yes
Save
OK
Save
Save