Nortel Networks Nortel 4070 - Manual (Page 28)

Getting started
28
• the name of the DECT system
• the Directory Number (DN) of the handset
• the handset name (if configured)
• the name of the active profile
• the time and date
If you leave the range of the DECT system, a “No Network” message
appears on the display screen.
The following figure shows the Idle mode screen.
Figure 6: Idle mode screen
For more information about key functions, see “Key functions in Idle
mode” (page 34) .
Call mode
In Call mode, the dialogue area displays the following information:
• the number and name (if available) of the calling party for an
incoming call
• the number and name (if added to your contacts list) of the called
party for an outgoing call
• the loudspeaker icon (if enabled)
• the microphone muted icon (if muted)