Nortel Networks Nortel 4070 - Manual (Page 192)

Handset accessories
192
1. Remove the MEM card from the frame as shown in the following
figure.
Figure 22: Extracting the MEM card from the frame
Installing the MEM card
To install the MEM card in the handset, perform the following steps:
1. Place the handset facedown on a flat surface.
2. Remove the battery compartment cover and the battery.
3. Slide in the MEM card from under the two small crescents and press
it, as shown in
Figure 23.
4. Ensure that you have inserted the MEM card completely.
Attention: When you remove the MEM card from the frame, do not
touch the metal contacts.