Nortel Networks Nortel 4070 - Manual (Page 178)

Telephone settings
178
Configuring emergency calls
Use the Emergency call feature to dial a number or send a text message
rapidly. Use the Emergency call menu to store an emergency number and
a text message. When you press the emergency key, one of the following
actions occur:
• If you do not enter a message, the number dials.
• If you define a message (up to 160 characters in length), the handset
sends the message to the number.
To assign an emergency call number, perform the following steps:
3. Press the Up or Down key to highlight the Filter off
mode and press the Select soft key.
4. Press the Clr key one or more times to return to the
idle display.
Attention: The Emergency call feature is available on both DECT 4027
and 4070 Handset, but the message can only be sent from
DECT 4070 Handset.
You can send text messages only if your system supports
this feature. Contact your system administrator to determine
if you can use this feature.
After you send a message, the handset stores the message
in the text message list. For more information, see
“Messaging” (page 97) .
1. Open the Calls menu as shown in “Accessing the
Calls settings menu” (page 169) .
Filter off
Select