Using speed dial, Using loudspeaker – Nortel Networks Nortel 4070 User Manual
Page 52
Call features
52
Using Speed dial
Use the Speed dial feature to make calls by dialling a one-digit code.
To use speed dial, perform the following step:
Using Loudspeaker
Your handset includes a Loudspeaker feature to allow several people in a
room to listen to a call.
To enable the Loudspeaker feature, perform the following steps:
1.
Long press the number key assigned to the phone
number.
You can use speed dial only after it is configured.
For more information, see
.
1.
Make or answer a call.
2.
Press the
Spk. on
soft key to enable the feature.
When the loudspeaker function is active, the
handset displays the loudspeaker icon.
•
Place the handset upright on a smooth, flat surface,
and leave the loudspeaker and microphone free of
obstruction.
•
Keep your handset approximately 0.5 metres away
from yourself while you speak.
3.
Press the
Volume up
or
Volume down
key to
configure the volume.
4.
Press the
Spk. off
soft key to disable the feature.
Spk. on
+
Spk. off