Nortel Networks Nortel 4070 - Manual (Page 43)

DECT system configuration
43
DECT system configuration
Use the information in this section to configure your DECT handset to
work with a DECT system.
This section describes the following tasks:
• “Accessing the Connectivity menu” (page 43)
• “Subscribing the handset to a DECT system” (page 44)
• “Manually selecting the DECT system” (page 46)
• “Enabling automatic DECT system selection” (page 46)
• “Terminating a subscription” (page 47)
• “Editing the system name and phone number” (page 48)
For more information about using the handset controls, see “Handset
controls” (page 33) .
Accessing the Connectivity menu
To access the Connectivity menu, perform the following steps:
1. Press the Menu soft key to access the Main menu.
2. Press the Up or Down key to highlight the Settings
icon.
3. Press the Select soft key.
4. Press the Left or Right key to highlight the
Connectivity menu.
Menu
Select