Nortel Networks Nortel 4070 - Manual (Page 67)

Calls list
67
Transferring a number to the caller filter list
To transfer a number from the All calls list to the caller filter list, perform
the following steps:
Attention: The Caller filter feature is available only on the DECT 4070
Handset.
1. Open the All calls list as shown in “Accessing the
All calls list” (page 64) .
2. Press the Up or Down key to highlight the required
entry.
3. Press the More soft key.
4. Press the Up or Down key to highlight the Save
option.
5. Press the Select soft key.
6. Press the Up or Down key to highlight the Caller
Filter option and press the Select soft key.
7. Use the Dialpad to edit the number and enter the
name (if necessary).
8. Press the Save soft key.
9. Press the Clr key one or more times to return to the
idle display.
More
Save
Select
Caller filter
Select
Save