Nortel Networks Nortel 4070 - Manual (Page 50)

Call features
50
Call features
You can use your handset to make and receive calls. You can also use
the handset to change the call settings.
Make a call
This section describes the features associated with making a call. You
can make a call from your DECT 4027 and 4070 Handsets using any of
the following methods:
• “Dialling a number” (page 50)
• “Using Predial mode” (page 51)
• “Using Speed dial” (page 52)
• “Using Loudspeaker” (page 52)
• “Using the telephone book to dial a number” (page 53)
• “Using the Central Directory to dial a number” (page 53)
• “Making an SOS call” (page 55)
Dialling a number
To dial a number, perform the following steps:
Attention: During a call, the display light switches off to prevent a rapid
battery discharge. Press the OK key to highlight the display.
1. Press the Call key.
2. Use the Dialpad to enter the phone number.
You can add additional digits to the number you
dial. For example, in some offices you must add a
digit at the beginning of the number to place a call
to an outside line.
R