Connecting through a telnet session – Nortel Networks MOG6xx User Manual
Page 46
46
WLAN IP Telephony Manager 2245 configuration
— Bits per second: 9600
— Data bits: 8
— Parity: None
— Stop bits: 1
— Flow control: None
Note:
If using Windows 2000, Service Pack 2 must be installed to enable the use of
HyperTerminal™.
3
Press Enter to display the login screen.
4
Enter the default login name (admin) and the default password (admin).
Programming note: The login name and password are case-sensitive.
The NetLink SVP-II System menu appears. See
Connecting through a Telnet session
1
Run a Telnet session to the IP address of the WLAN IP Telephony Manager 2245.
2
Enter the login name and the password.
Programming note: The login name and password are case-sensitive.
The NetLink SVP-II System menu appears. See
This manual is related to the following products: