Network Technologies SM-nXm-C5AV-LCD User Manual
Page 9

NTI VEEMUX AUDIO/VIDEO MATRIX SWITCH VIA CAT5
5
2.
Make connections for a Local User (see Fig. 2)
a)
Connect the cable from the local user's VGA monitor to the female 15HD port on the Local Unit.
b)
Connect the cable from the local speakers into the 3.5mm jack on the local unit.
Figure 2- Connect Local User Components to Local Unit
3.
Connect the CAT5 cable to the “Cat 5” port on the Local Unit. (See Fig. 2.) When properly inserted
the cable end should snap into place.
Note: If an RJ45 wall outlet is being used, connect the other end of the extension cable to the
RJ45 wall outlet.
WARNING: Never connect the ST-C5VA-600 Extender to an Ethernet card, Ethernet router, hub or switch or
other Ethernet RJ45 connector of an Ethernet device. Damage to devices connected to the Ethernet may result.
!
VGA
Multi-Scan
Monitor
15HD Female
Video Connector
Front View of
Local Unit
ST-C5VA-600 Local Unit (Front and Rear View)
CAT5 Cable to
VEEMUX
Rear View of Local Unit
Local User's Monitor and Speakers
Green Power LED
Yellow Communication LED
NTI
R
Network Technologies Inc
XTENDEX
-
+