Network Technologies SM-nXm-C5AV-LCD - Manual (Page 27)

NTI VEEMUX AUDIO/VIDEO MATRIX SWITCH VIA CAT5
23
Setup Pages
These settings enable the user to configure the VEEMUX web interface connection.
•
This change will take a few seconds and automatically redirect the user to the IP
address specified.
Note: Since the webserver will be restarting all active connections will be logged out.
The Website Timeout option controls how long an inactive web connection will stay logged in. Any change to the
Website Timeout configuration takes effect immediately.
The “Telnet configuration” block enables the VEEMUX to receive commands on port 2005 in addition to port 2000.
For more on telnet use, see “Telnet Interface- Port 2000” on page 16.
Note: The VEEMUX must be power cycled in order for a change in the Telnet configuration block to take
effect.
Figure 24- Web interface Setup page
Figure 25- Web interface Serial Setup page
The Serial Address and Serial Speed (Fig. 24) do not require a reset and will take effect immediately.