National Instruments PXI NI 5401 - Manual (Page 43)

© National Instruments Corporation B-1 NI 5401 User Manual
B
Optional Accessories
National Instruments offers a variety of products to use with your NI 5401,
including probes, cables, and other accessories:
• Shielded and unshielded I/O connector blocks (SCB-68, TBX-68,
CB-68)
• RTSI bus cables
For more specific information about these products, refer to your National
Instruments catalogue or Web site, or call the office nearest you.
Cabling
The following list gives recommended part numbers for cables that you can
use with your NI 5401 device:
• BNC male to BNC male, 50
Ω
cable from ITT Pomona Electronics
(part number BNC-C-xx)
• BNC male to BNC male, 75
Ω
cable from ITT Pomona Electronics
(part number 2249-E-xx)
• BNC female to RCA phono plug adapter, from ITT Pomona
Electronics (part number 5319)
• BNC 50
Ω
feed-through terminator adapter from ITT Pomona
Electronics (part number 4119-50)
• BNC female-female adapter from ITT Pomona Electronics
(part number 3283)