NetComm NB6W User Manual

Page 81

Text mode
Original mode

YML854 Rev1

NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn

User Guide

www.netcomm.com.au

IP Routing – Dynamic Routing (NB6Plus4W/NB6Plus4Wn only)

Routing Information Protocol (RIP) is utilized by means of exchanging routing information between routers. It
helps the routers to determine optimal routes. This page allows you to enable/disable this function.

RIP version:

It incorporates the RIP information when receiving and broadcasting the RIP packets. From the drop
down menu, select a RIP version to be accepted,

1, 2 or both.

Operation:

There are two modes for you to choose,

Active and Passive. Select Active for transmitting and

receiving data, or select Passive for receiving data only.

Enabled:

Check

Enabled to enable the RIP function on different interface. Otherwise, disable this function.

Click

Apply to invoke the settings set here.