NetComm NB6W - Manual (Page 18)

NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn User Guide YML854Rev1
18 www.netcomm.com.au
NB6Plus4Wn LED Indicators
The LED Indicators are located on the front of the unit, their meanings are as follows:
Function Color Definition
Power Off Power is off.
Solid Green Power is on and the device operates normally.
Solid Red Power on self-test in progress
The device enters the console mode of the boot loader.
Power on self-test failure if the led always stays solid red.
Flash Red Firmware upgrades in progress
ADSL Off No ADSL signal is detected.
Slow Flash Green ADSL line is handshaking in progress
Fast Flash Green ADSL line is training in progress
Solid Green ADSL line connection is up.
PPP Off No PPPoA or PPPoE connection
Solid Green At least one PPPoA or PPPoE connection is up. The users can
access the Internet now.
Ethernet
1, 2, 3, 4
Off No Ethernet signal is detected.
Flash Green User data is going through Ethernet port
Solid Green Ethernet interface is ready to work.
WLAN Off No radio signal is detected or WLAN has been disabled.
Flash Green User data is going through WLAN port
Solid Green WLAN interface is ready to work.
WPS Off WPS is off
Flash Green WPS is pushed and ready for wireless client to connect