NetComm NB6W - Manual (Page 65)

YML854 Rev1 NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn User Guide
www.netcomm.com.au 65
Configure the secondary IP Address and Subnet mask:
Check this box to enter another set of IP Address and Subnet Mask to connect to your router if they
are not included in the range that DHCP server accepts.
After checking this box, the secondary IP address and subnet mask entries will show up, as
shown below.
Secondary IP Address & Subnet mask:
Enter the information provided by your ISP for your LAN connection.
mTU:
It means the maximum size of the packet that transmitted in the network. The packet of the data
greater than the number set here will be divided into several packets for transmitting. Type the value
into the field of
MTU. The default setting for LAN configuration is 1500.
Apply:
Click this button to activate the settings listed above.