NetComm NB6W User Manual
Page 49
YML854 Rev1
NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn
NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn
User Guide
www.netcomm.com.au
4
quick Setup
The quick setup wizard will guide you to configure the ADSL router through some specific steps. Yet different
connection interface will lead to different setting pages. Refer to the following pages for detailed information.
Auto Scan Internet Connection (PvC):
If there is no any PVC configured in your ADSL router, you can check this item. Otherwise, please
uncheck this box.
vPI (virtual Path Identifier):
Identifies the virtual path between endpoints in an ATM network. The valid range is from 0 to 255. To
enter the setting, please refer to the setting that the ISP offered.
vCI (virtual Channel Identifier):
Identifies the virtual channel endpoints in an ATM network. The valid range is from 32 to 65535 (1 to 31 is
reserved for well-known protocols). To enter the setting, please refer to the setting that the ISP gave you.
After entering the VPI/VCI value, please click
Next for the following step.