NetComm NB6W - Manual (Page 106)

NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn User Guide YML854Rev1
106 www.netcomm.com.au
Transmission mode:
This section configures the data transmission mode. If desired, you can choose from the drop down menu to
limit the NB6Plus4Wn to certain Data modes.
802.11b/g/n or 802.11b/g mixed mode:
Channel Width
This is the range of frequencies that will be used.
Primary Channel
This selects the second channel to be used when the channel bandwidth is 40MHz.
Channel:
The frequency in which the radio links are about to be established. Select one channel that you want from the
drop down list.
As an administrator of the network, one must search which channels are available and then assign one
available channel as the communication channel. All the other clients that match the SSID and pass security
authentication can access this device and will use the same channel that you set here.
Transmission Rate:
This section allows you to specify the data transmission rate. Make a selection by choosing an option from the
drop-down menu.
802.11b only:
802.11g only: