Nb6w led indicators – NetComm NB6W User Manual
Page 12
NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn
User Guide
YML854Rev1
1
www.netcomm.com.au
NB6W LED Indicators
The LED Indicators are located on the front of the unit, their meanings are as follows:
Function
Color
Definition
Power
Off
Power is off.
Solid Green
Power is on and the device operates normally.
Solid Red
Power on self-test in progress
The device enters the console mode of the boot loader.
Power on self-test failure if the led always stays solid red.
Flash Red
Firmware upgrades in progress
ADSL
Off
No ADSL signal is detected.
Slow Flash Green
ADSL line is handshaking in progress
Fast Flash Green
ADSL line is training in progress
Solid Green
ADSL line connection is up.
PPP
Off
No PPPoA or PPPoE connection
Solid Green
At least one PPPoA or PPPoE connection is up. The users can access
the Internet now.
Ethernet
Off
No Ethernet signal is detected.
Flash Green
User data is going through Ethernet port
Solid Green
Ethernet interface is ready to work.
USB
Off
No USB signal is detected.
Flash Green
User data is going through USB port
Solid Green
USB interface is ready to work.
WLAN
Off
No radio signal is detected or WLAN has been disabled.
Flash Green
User data is going through WLAN port
Solid Green
WLAN interface is ready to work.