Navman iCN 620 User Manual

Page 67

NAVMAN

iCN 620 user manual

This function can be

disabled in the

SETTINGS menu.

Back-on-Track™ Feature

The iCN 620 is designed to re-plan your route automatically if you take a wrong turn.
A ? symbol will appear in the top left-hand corner of the map screens when the unit is busy recalculating the route.

Automatic Restart Feature
1 If you power down while travelling to a destination (i.e. when a route has been calculated), the unit will

automatically return to your chosen map screen when you restart. The route will be recalculated from
your current position.

2 If you power down while you are in the process of changing Settings, the changes you have made

will be lost.

3 If you power down while entering a destination address (before the unit has calculated

the route), the information you have entered will be lost.

4 If you do not wish to continue using the programmed route when you restart the unit, return to the

Main Menu by pressing the MENU/Power button. You will notice that an additional option is
available in the Main Menu called CANCEL ROUTE. Select
CANCEL ROUTE.

5 Do not remove an SD or MMC memory card while navigating or the unit may reset. Remove memory

cards from the unit only when no route is set.

The automatic

restart facility is

useful if, for example,

you stop the vehicle

to refuel.