Navman iCN 620 User Manual
Page 30
30
NAVMAN
iCN 620 user manual
To remove the
suction cup, pull the
lever up. Release the
suction using
release tab.
Lever
Suction cup
Locking nut
ý
Should you
experience problems
with your suction
cup not holding
on, clean an area
of your windshield
with a cloth dabbed
in isopropyl alcohol
[tape head cleaner]
let it dry, then
re-apply the
suction cup.
Suction Mount to Windshield
1 Choose a position on the windshield where the iCN 620 will be clearly visible by the driver. Follow the safety
guidelines at the front of this manual to ensure that the unit does not obstruct the view of the driver, or interfere
with the operation of any airbags and safety devices in the vehicle.
2 Make sure that both the windshield and the suction cup are thoroughly clean and dry.
3 Hold the suction cup firmly against the windshield and press the lever down until it snaps shut.
4 The ball foot should now be securely fixed on the windshield.
5 Slip the locking nut loosely over the ball foot, with the flat side facing upwards.