Polycom RMX 1000 - Manual (Page 80)

9-1
9
Conference/Participant
Monitoring
Through the real-time conference-monitoring platform of the system, you
can easily monitor ongoing conferences, track participants and conference
progress, and perform control operations as needed. With the RMX 1000, you
can implement two types of monitoring operations:
• Conference monitoring – On the main window, view the ongoing
conferences and information about the specified conference and
specified video, and change the conference control, management and
other parameters as needed.
• Participant monitoring – View the status and detailed parameters of
participants, change the screen layout of the endpoint, and set a message
overlay to be viewed by the site.
Conference Monitoring
Viewing Conferences List Pane
The Conferences list pane always shows information about ongoing
conferences. The table below explains conference information.
Table 9-1 Conference Information
Parameter Conference Information
Name
The interface displays the conference name.
Status
The interface displays the status of the ongoing conference. No
indication will be displayed if the connection of participants is
normal. Corresponding indicators appear with a warning icon at the
occurrence of the following statuses:
ƒ Audio – Problems with the participant’s audio
ƒ
Empty – No participant is connected.
ƒ Faulty Connection – Participants are connected, but the
connection is problematic.
ƒ Not Full – Not all the defined participants are connected.
ƒ Partially Connected – The connection process is not yet
complete, and the video channel has not been connected.
ƒ
Single Participant – Only one participant is connected.
ƒ Video– Problems with the participant’s video