Polycom RMX 1000 - Manual (Page 59)

Chapter 6 – Meeting Rooms
6-2
General Settings
Figure 6-2 New Meeting Room - General
The table below explains the detailed meanings of these parameters.
Table 6-1 Parameter Description for New Meeting Room – General
Parameter Description
Meeting Room
Name
Set a unique name to identify the meeting room. When a
meeting room is created, the system will automatically
generate a unique name for it.
Profile
Select the profile to be used for this conference from the
drop-down list. The lower part of this option displays the major
parameter values defined for the profile:
ƒ Line Rate:
The maximum bandwidth to be used by each
participant in the conference.
ƒ Minimum ports to be reserved/Maximum ports to be
used:
The minimum/maximum number of allowed
conference participants. Automatic indicates that the number
of video participants is determined according to the available
resource of the RMX 1000.
The conference profile defines the basic parameters of
conference scheduling, such as the bandwidth, encryption,
and video quality. For more information on conference profiles,
see Conference Profiles. When a conference is created, the
system selects the default profile of the device by default.
Duration
Specify the conference duration in the range of 0-24 hours. The
input format is H:M and the default value is 2:0, namely, 2 hours.
Conference ID
When a meeting room is created, the system automatically
allocates a conference ID. You can also set a unique conference
ID on the device. To directly dial into the conference, the
participant must know its ID.
Conference
Password
Enter the conference password. To connect to this conference,
the participant must enter this password. If this parameter is
empty, it means the conference has no password.