Polycom RMX 1000 User Manual

Page 36

Polycom RMX 1000 User Guide

3-9

The table below shows the strings dialed by the endpoint under different
scenarios:

Table 3-4

Dial-in String Rule for SIP Endpoints - Registered to Server

Scenario

Dial-in String

Create this conference

Create this conference and set:
Conference password: 1111
Chairperson password: 2222

Create this conference and invite:
Participant 1 - TEL URI/E.164：123
Participant 2 - TEL URI/E.164：321

Create this conference, set the

above passwords. and invite the

above participants

1001$$1111$$2222*123*[email protected]

If the SIP server is not configured on the network, the format of the dial-in
string is as follows:

[$$Conference password][$$Chairperson

password][*Participant's IP address or FQDN]@

Here, the character in the <> symbol is mandatory, and that in [ ] is optional.

For example:

RMX 1000 IP address: 172.22.30.40

ID of the conference to be created: 1001

The table below shows the strings dialed by the endpoint under different
scenarios:

Table 3-5

Dial-in String Rule for SIP Endpoints – Unregistered to Server

Scenario

Dial-in String

Create this conference [email protected]

Create this conference and set:
Conference password: 1111
Chairperson password: 2222

Create this conference and invite:
Participant 1 - IP address:

172.22.30.1
Participant 2 - IP address:

172.22.30.2

1001*172.22.30.1*172.22.30.2@

172.22.30.40

Create this conference, set the

above passwords, and invite the

above participants

1001$$1111$$2222*172.22.30.1*172.22.30.2

@172.22.30.40

This manual is related to the following products: