Polycom RMX 1000 - Manual (Page 127)

Chapter 14 – RMX Utilities
14-10
Configure the following parameters:
Table 14-6 Parameter Configuration of SNMP Traps
Parameter Description
SNMP Trap
Version
Specifies the SNMP Trap version used by MCU
Version 1 and Version 2 - When this option is selected, you
need to configure Trap Destinations and Community Name.
Version 3 - Specifies the parameter settings of secure and
remote configuration; when this option is selected, you need to
configure User Name, Security Level and related options.
Trap Destinations
Specifies sending destinations of SNMP Traps
Community Name
Specifies the name of community to which the MCU and SNMP
management workstation belongs. The agent to authenticate
the SNMP management workstation uses community Name.
User Name
Set the name of user remotely accessed by SNMP.
Engine ID
Specifies the engine ID of SNMP
Security Level
Specifies whether to enable the authentication mechanism and
encryption mechanism
Authentication
Protocol
Specifies the authentication algorithm. MD5 and SHA are
available.
Authentication
Password
You can set a password for the authentication protocol to
enhance security.
Privacy Protocol
Specifies the encryption algorithm. DES and AES are
available.
Privacy Password
Enter the password of encryption algorithm.
Trap Setting
Specifies whether the agent sends Traps packets to the
management workstation in the following cases:
ƒ System alerts
ƒ Connection
ƒ The conference starts/ends.
ƒ A new participant enters the lobby.
Product Activation
The Product Activation page is used in the following three activation cases:
• Activate the newly purchased RMX 1000 device.
• Activate payment function items of the RMX 1000, such as H.264, 720p
conference, and conference reservation.
• Activate the upgraded device.
Click Setup -> Product Activation in the menu bar on the top of the Web
page. The Product Activation page opens, which lists the serial number, current
version number, and other device information.