Polycom RMX 1000 - Manual (Page 100)

Polycom RMX 1000 User Guide
11-5
Table 11-3 Gatekeeper Setting
Parameter Description
IP Network Type
Set the IP network type for the RMX 1000 system to make
a call. You need to set it based on the call type used for the
participant's endpoint. It can be set to:
ƒ H.323
: Only H.323 calls are supported.
ƒ SIP
: Only SIP calls are supported.
ƒ H.323 & SIP
: H.323 calls and SIP calls are supported at
the same time.
Settings of the gatekeeper related parameters are
available only when the H.323-supporting network type is
selected.
Register to Gatekeeper
Set whether or not to register with the gatekeeper. You must
check this option to set the parameters that follow.
Primary (Alternate)
Gatekeeper
Indicates whether or not the device is registered with the
primary (or alternate) gatekeeper.
Gatekeeper IP Address
Set the IP address for the primary (or alternate)
gatekeeper.
Gatekeeper Port
The port number for the primary (or alternate) gatekeeper.
System Prefix/E164.
Set the E.164 number for the system.
System H.323 Alias
Set the H.323 alias for the system.
SIP Server
If your network supports Session Initiation Protocol (SIP), you can connect
an IP call with SIP.
In the IP Network Services interface, click SIP Server to configure SIP server
parameters.