Adjusting the magnetic sensor, Replacing the basket lift actuator – Pitco Frialator Gas Fryers SG Serie User Manual
Page 46
Pitco Solstice and Solstice Supreme High Efficiency Gas Fryers
L22‐345 R1
46
Adjusting the Magnetic Sensor
1. Make sure the sensor is approximately 3/4 inch
from top of the motor to bottom of the sensor.
2. Make sure the sensor is approximately 7 3/4
inch from top of the motor to bottom of the
sensor.
Replacing the Basket Lift Actuator
1. Cut all zip ties on the basket lift driver board.
2. Disconnect the transformer from the driver
board. See “Wiring Diagram – Basket Lifts” on
page 91.
This manual is related to the following products: