Pitco Frialator 24P User Manual
Model 24p & 34p donut fryers
Pitco Frialator, Inc., P.O. Box 501, Concord, NH 03302-0501
•
1
509 Route 3A, Bow NH 03304, USA
(603) 225-6684
•
Fax (603) 225-8472
•
www.pitco.com
APPROVALS
CSA Certified
(AGA, CGA)
NSF Listed
MEA Approved
Project
Item No.
Quantity
Model 24P & 34P Donut Fryers
Model 24P & 34P
Donut Fryers
STANDARD ACCESSORIES
Tank - stainless steel construction
Cabinet - stainless front, door, back and sides
Control:
Mechanical Thermostat
Electric Thermostat (at no additional charge)
Drainboard (also used as fryer cover)
Hinged wire mesh submerger screen wtih safety grid
handles
6” (15.24cm) legs adjustable
Two nickle plated wire mesh screens with handles
Wire mesh tube screen
One drain line clean-out rod
One drain extension
Donut turner sticks (2)
AVAILABLE OPTIONS & ACCESSORIES
(At Additional Cost)
Solid state thermostat with melt cycle
Cover
Donut dropper bracket
(includes flanged bolt-down leg assembly)
Top holding shelf with removable tray
6” (15.2 cm) adjustable casters, front locking
STANDARD SPECIFICATIONS
CONSTRUCTION
Tank constructed of durable stainless steel with an
extra smooth peened finish for easy cleaning.
Long-lasting, high-temperature alloy stainless steel
heat baffles are mounted in the heat exchanger
tubes to provide maximum heating and combustion
efficiency.
Standing pilot light design provides a ready flame
when heat is required.
CONTROLS
Thermostat maintains selected temperature
automatically between 200
°
F (93
°
C) and 400
°
F
(204
°
C).
Integrated gas control valve acts as a manual and
pilot valve, automatic pilot valve, gas filter, pressure
regulator, and automatic main valve.
Gas control valve prevents gas flow to the main
burner until pilot is established and shuts off all gas
flow automatically if the pilot flame goes out.
Temperature limit switch safely shuts off all gas
flow if the fryer temperature exceeds the upper
limit.
OPERATIONS
Front 1” (2.5 cm) drain for quick draining.
Standing pilot and thermostat maintains
temperature automatically at the selected
temperature (200
°
F (93
°
C) and 400
°
F (204
°
C).
L10-014 Rev 7 (06/07)
Shown with optional casters