Pitco Frialator Gas Fryers SG Serie - Manual (Page 40)

Pitco Solstice and Solstice Supreme High Efficiency Gas Fryers
L22‐345 R1
40
Replacing the Frypot
1. Remove the controller front panel, gas valve,
pilot assembly, and burner assembly.
2. Remove the baffle by pulling it out.
NOTE: For SSH models only.
3. Remove the drain manifold flange nut using a
9/16 inch close-ended wrench.
4. Loosen the collet using a spanner wrench.
5. Remove the collet.
6. Slide piping away from flange.