Pitco Frialator Gas Fryers SG Serie - Manual (Page 20)

Pitco Solstice and Solstice Supreme High Efficiency Gas Fryers
L22‐345 R1
20
Replacing the Controllers and Wiring Harness
Removing the Controller Front Panel Bezel
1. Remove the two (2) screws on the controller
panel using a Phillips screwdriver.
2. Pull out the controller panel front bezel.
3. Disconnect the controller wiring harness.
4. Remove the four (4) screws on the back side of
the bezel using a 3/8 inch nut driver.