Pitco Frialator Gas Fryers SG Serie - Manual (Page 24)

Pitco Solstice and Solstice Supreme High Efficiency Gas Fryers
L22‐345 R1
24
Replacing the Ignition Module
1. Remove one (1) screw, which hold the ignition
module, using a 5/16 inch socket.
2. Pull the module box and bracket toward the
front of the unit, and then to the right.
3. Disconnect the plug.
4. Remove the ignition wire.
5. Remove the two (2) screws, which hold the
module on the plate, using a Phillips
screwdriver.
6. Remove the harness pins using needle-nose
pliers.
7. Follow steps 1 through 6 in reverse.