Pitco Frialator Gas Fryers SG Serie - Manual (Page 23)

Pitco Solstice and Solstice Supreme High Efficiency Gas Fryers
L22‐345 R1
23
Replacing the Relay Board and Paper
1. Remove the front panel. See “Removing the
Controller Front Panel Bezel” on page 20.
2. Disconnect all connections.
3. Remove the four (4) screws, which hold down
the relay board, using a small flathead
screwdriver.
4. Remove the relay board and flip it over.
5. Remove the existing insulator and replace with a
new insulator.
NOTE: Make sure the insulator does not
have puncture marks in it.
6. Reconnect all connections and reinstall the front
panel.